Բաց թողնել հիմնական բովանդակությունը

 Ինչպե՞ս ընտրել սյունակ Excel- ի սյունակի վերնագրի հիման վրա:

Ենթադրելով, որ դուք ունեք մի մեծ աշխատանքային թերթ, որը պարունակում է բազմաթիվ սյունակներ, և այժմ կցանկանայիք ընտրել սյունակը վերնագրի անվանման հիման վրա: Խոշոր աշխատանքային թերթում սյուն առ սյուն գտնելու համար շատ ժամանակ է վատնում, այս հոդվածում ես կներկայացնեմ Excel- ում այս աշխատանքը լուծելու արագ մեթոդ:

Ընտրեք սյուն `հիմնվելով սյունակի վերնագրի անվան վրա` VBA կոդով


Ընտրեք սյուն `հիմնվելով սյունակի վերնագրի անվան վրա` VBA կոդով

Հաջորդ VBA կոդը կարող է օգնել ձեզ ընտրել սյունակները ՝ ելնելով հատուկ վերնագրի անունից, խնդրում ենք արեք հետևյալ կերպ.

1, Պահեք պահեք ALT + F11 բացել ստեղները Microsoft Visual Basic հավելվածների համար պատուհան.

2: Սեղմեք Տեղադրել > Մոդուլներ, և տեղադրեք հետևյալ կոդը Մոդուլներ Պատուհանը:

VBA կոդ. Ընտրեք սյունը ՝ հիմնվելով սյունակի վերնագրի անվան վրա.

Sub FindAddressColumn()
'Updateby Extendoffcie
    Dim xRg As Range
    Dim xRgUni As Range
    Dim xFirstAddress As String
    Dim xStr As String
    On Error Resume Next
    xStr = "Name"
    Set xRg = Range("A1:P1").Find(xStr, , xlValues, xlWhole, , , True)
    If Not xRg Is Nothing Then
        xFirstAddress = xRg.Address
        Do
            Set xRg = Range("A1:P1").FindNext(xRg)
            If xRgUni Is Nothing Then
                Set xRgUni = xRg
            Else
                Set xRgUni = Application.Union(xRgUni, xRg)
            End If
        Loop While (Not xRg Is Nothing) And (xRg.Address <> xFirstAddress)
    End If
    xRgUni.EntireColumn.Select
End Sub

ՆշումՎերոհիշյալ ծածկագրում A1: P1 վերնագրերի շարքն է, որից ուզում եք սյուններ ընտրել, և «Անուն»Սցենարում xStr = "Անուն" վերնագրի անունն է, որի հիման վրա ցանկանում եք ընտրել սյունակները: Խնդրում եմ դրանք փոխեք ձեր կարիքի:

3, Կոդը պատճենելուց և տեղադրելուց հետո սեղմեք F5 այս կոդը գործարկելու բանալին, և հատուկ վերնագրի անունով բոլոր սյունակները միանգամից ընտրվել են, տես նկարի նկարը.

Գրասենյակի արտադրողականության լավագույն գործիքները

🤖 Kutools AI օգնականՀեղափոխություն կատարել տվյալների վերլուծության հիման վրա՝ Խելացի կատարում   |  Ստեղծեք ծածկագիր  |  Ստեղծեք հատուկ բանաձևեր  |  Վերլուծել տվյալները և ստեղծել գծապատկերներ  |  Invoke Kutools-ի գործառույթները...
Հանրաճանաչ հատկություններ: Գտեք, ընդգծեք կամ նույնականացրեք կրկնօրինակները   |  Deleteնջել դատարկ շարքերը   |  Միավորել սյունակները կամ բջիջները՝ առանց տվյալների կորստի   |   Կլոր առանց բանաձևի ...
Super Փնտրել: Բազմաթիվ չափանիշների VLookup    Բազմակի արժեք VLookup  |   VLookup բազմաթիվ թերթերում   |   Fuzzy Փնտրել ....
Ընդլայնված բացվող ցուցակ: Արագ ստեղծեք բացվող ցուցակը   |  Կախված բացվող ցուցակ   |  Բազմակի ընտրություն Drop Down ցուցակ ....
Սյունակի կառավարիչ: Ավելացրեք որոշակի քանակությամբ սյունակներ  |  Տեղափոխել սյունակները  |  Փոխարկել թաքնված սյունակների տեսանելիության կարգավիճակը  |  Համեմատեք միջակայքերը և սյունակները ...
Առանձնահատկություններ: Ցանցի կենտրոնացում   |  Դիզայնի տեսք   |   Մեծ Formula Bar    Աշխատանքային գրքույկի և թերթիկների կառավարիչ   |  Ռեսուրսների գրադարան (Ավտոմատ տեքստ)   |  Ամսաթիվ ընտրող   |  Միավորել աշխատանքային թերթերը   |  Գաղտնագրել/գաղտնազերծել բջիջները    Ուղարկեք նամակներ ըստ ցանկի   |  Սուպեր զտիչ   |   Հատուկ զտիչ (զտել թավ/շեղ/շեղված...) ...
Լավագույն 15 գործիքների հավաքածու12 Տեքստ Գործիքներ (Ավելացրեք տեքստ, Հեռացնել նիշերը, ...)   |   50+ Աղյուսակ Տեսակներ (Գանտի աղյուսակը, ...)   |   40+ Գործնական Բանաձեւեր (Հաշվարկել տարիքը ՝ ելնելով ծննդյան տարեդարձից, ...)   |   19 միացում Գործիքներ (Տեղադրեք QR կոդ, Տեղադրեք նկար ուղուց, ...)   |   12 Փոխարկում Գործիքներ (Բառեր համարներ, Արտարժույթի փոխակերպումը, ...)   |   7 Միաձուլում և պառակտում Գործիքներ (Ընդլայնված կոմբինատ տողեր, Պառակտված բջիջներ, ...)   |   ... եւ ավելին

Լրացրեք ձեր Excel-ի հմտությունները Kutools-ի հետ Excel-ի համար և փորձեք արդյունավետությունը, ինչպես երբեք: Kutools-ը Excel-ի համար առաջարկում է ավելի քան 300 առաջադեմ առանձնահատկություններ՝ արտադրողականությունը բարձրացնելու և ժամանակ խնայելու համար:  Սեղմեք այստեղ՝ Ձեզ ամենաշատ անհրաժեշտ հատկանիշը ստանալու համար...

Նկարագրություն


Office Tab- ը Tabbed ինտերֆեյսը բերում է Office, և ձեր աշխատանքը շատ ավելի դյուրին դարձրեք

  • Միացնել ներդիրներով խմբագրումը և ընթերցումը Word, Excel, PowerPoint- ով, Հրատարակիչ, Access, Visio և Project:
  • Բացեք և ստեղծեք բազմաթիվ փաստաթղթեր նույն պատուհանի նոր ներդիրներում, այլ ոչ թե նոր պատուհաններում:
  • Բարձրացնում է ձեր արտադրողականությունը 50%-ով և նվազեցնում մկնիկի հարյուրավոր սեղմումները ձեզ համար ամեն օր:
Comments (8)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Good job, works great!
This comment was minimized by the moderator on the site
Hi everyone...

How can I make it so that only the column data is selected, without the header, instead of the entire column?

Thanks
This comment was minimized by the moderator on the site
Thank you spo much saved my day !
This comment was minimized by the moderator on the site
Thanks - at first it seemed to work, but then I noticed it didn't include the first-found column - it started with the second and on.

Which is explainable: you set xRg twice, but you do not include the first one.

TBH: initially I thought it worked fine, but then that 'error' showed up and I had to figure out why....

I fixed it as follows: (in Excel the comments will turn green and show my edits: '***)

<code>

Sub FindAddressColumn()

'Updateby Extendoffcie

Dim xRg As Range

Dim xRgUni As Range

Dim xFirstAddress As String

Dim xStr As String

On Error Resume Next
xStr = "Name"
Set xRg = Range("A1:P1").Find(xStr, , xlValues, xlPart, , , True)

If Not xRg Is Nothing Then

xFirstAddress = xRg.Address

Do

If xRgUni Is Nothing Then

Set xRgUni = Range(xFirstAddress) '*** Using the first-found range

Else

Set xRgUni = Application.Union(xRgUni, xRg)

End If



Set xRg = Range("A1:P1").FindNext(xRg) '*** Now searching for the second/next ones



Loop While (Not xRg Is Nothing) And (xRg.Address <> xFirstAddress)

End If

xRgUni.EntireColumn.Select

End Sub


</code>

This now works for me, but I hope to learn from you if I overlooked anything.
This comment was minimized by the moderator on the site
Hi, Can you suggest the macro for the issue mentioned below by Shaun
This comment was minimized by the moderator on the site
Hi, looks great work. But I am getting the compile error: Argument not optional while highlighting the ". Union". What should I do?
This comment was minimized by the moderator on the site
This is great, but what if I wanted to copy say, CustomerName, OrderNumber, OrderDate, FulfillmentDate, OrderStatus from Sheet1 with many more columns.
How do I only specify the columns that are needed to be copied to another sheet? This seems to only specify one column.
I have tried some things, but the problem is more where the columns are not necesarily in the same order on the source sheet. The source data in Sheet1 is pasted from the Windows clipboard to the Excel sheet.

It may be, CustomerName, OrderDate, OrderNumber, OrderStatusm FulfillmentDate or some other order.

I need them to be copied into a new sheet in a specific order as there are formulas in Sheet2 that are applied to what is copied from Sheet1 to Sheet2.

Other than shifting columns around after pasting from Windows clipboard, I can't figure this out.

Please help if possible.

Thank you kindly for the above though.
This comment was minimized by the moderator on the site
Dim xRg As Range
Dim xRgUni As Range
Dim xFirstAddress As String
Dim xStr As String

Are variables being declared.

Hence to use the above code again for another column you would have to declare new variables.

Dim xRg2 As Range
Dim xRgUni2 As Range
Dim xFirstAddress2 As String
Dim xStr2 As String

And replace every instance of xRg with xRg2 in the code ect. Does that make sense?
There are no comments posted here yet
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations