Բաց թողնել հիմնական բովանդակությունը

Ինչպե՞ս ինքնալրացնել Excel- ը բացվող ցուցակում մուտքագրելիս:

Բազմաթիվ տարրերով տվյալների վավերացման բացվող ցանկի համար դուք պետք է ոլորեք ցուցակում վերև վար՝ գտնելու ձեզ անհրաժեշտ մեկը կամ ճիշտ մուտքագրեք ամբողջ բառը ցուցակի վանդակում: Կա՞ որևէ միջոց՝ բացվող ցուցակը ավտոմատ կերպով լրացնել համապատասխան նիշերը մուտքագրելիս: Սա կօգնի մարդկանց ավելի արդյունավետ աշխատել բջիջներում բացվող ցուցակներով աշխատաթերթերում: Այս ձեռնարկը տրամադրում է երկու մեթոդ, որոնք կօգնեն ձեզ հասնել դրան:

Բացվող ցուցակները դարձրեք ինքնալրացում VBA կոդով
Հեշտությամբ բացվող ցուցակները դարձրեք ինքնալրացում 2 վայրկյանում

Բացվող ցուցակի այլ ձեռնարկներ ...


Բացվող ցուցակները դարձրեք ինքնալրացում VBA կոդով

Խցում համապատասխան տառեր մուտքագրելուց հետո բացվող ցուցակն ինքնալրացնելու համար արեք հետևյալը.

Նախևառաջ, անհրաժեշտ է կոմբինատ տուփ մտցնել աշխատաթերթի մեջ և փոխել դրա հատկությունները:
  1. Բացեք աշխատաթերթը, որը պարունակում է բացվող ցանկի բջիջները, որոնք ցանկանում եք դրանք ավտոմատ կերպով լրացնել:
  2. Նախքան Combo տուփը տեղադրելը, դուք պետք է ավելացնեք «Developer» ներդիրը Excel ժապավենի վրա: Եթե ​​ձեր ժապավենի վրա ցուցադրվում է «Developer» ներդիրը, անցնել 3-րդ քայլին. Հակառակ դեպքում, կատարեք հետևյալը, որպեսզի «Develper» ներդիրը հայտնվի ժապավենում. Սեղմեք Ֆայլ > Ընտրանքներ բացելու համար Ընտրանքներ պատուհան Սրանում Excel ընտրանքներ պատուհանը, սեղմեք Անհատականացրեք ժապավենը ձախ պատուհանում ստուգեք Երեվակիչ տուփը, ապա կտտացրեք OK կոճակ Տեսեք,
  3. Սեղմել Երեվակիչ > Տեղադրել > Combo Box (ActiveX հսկողություն).
  4. Ընթացիկ աշխատաթերթում գծեք համակցված տուփ: Աջ սեղմեք դրա վրա և ընտրեք Հատկություններ աջ կտտացնելու ցանկից:
  5. Է Հատկություններ երկխոսության տուփ, խնդրում ենք փոխարինել բնօրինակ տեքստը (Անուն) դաշտը հետ TempCombo:
  6. Անջատեք Դիզայնի ռեժիմ սեղմելով Երեվակիչ > Դիզայնի ռեժիմ:
Դրանից հետո կիրառեք ստորև նշված VBA կոդը
  1. Աջ սեղմեք ընթացիկ թերթի ներդիրի վրա և սեղմեք Դիտել կոդը համատեքստային ընտրացանկից: Տեսեք,
  2. Բացման մեջ Microsoft Visual Basic հավելվածների համար պատուհան, խնդրում ենք պատճենել և տեղադրեք ներքևի VBA կոդը աշխատանքային թերթի Կոդի պատուհանում:
    VBA կոդ. Ինքնալրացում ՝ բացվող ցուցակը մուտքագրելիս
    Private Sub Worksheet_SelectionChange(ByVal Target As Range)
    'Update by Extendoffice: 2020/01/16
        Dim xCombox As OLEObject
        Dim xStr As String
        Dim xWs As Worksheet
        Dim xArr
        
        Set xWs = Application.ActiveSheet
        On Error Resume Next
        Set xCombox = xWs.OLEObjects("TempCombo")
        With xCombox
            .ListFillRange = ""
            .LinkedCell = ""
            .Visible = False
        End With
        If Target.Validation.Type = 3 Then
            Target.Validation.InCellDropdown = False
            Cancel = True
            xStr = Target.Validation.Formula1
            xStr = Right(xStr, Len(xStr) - 1)
            If xStr = "" Then Exit Sub
            With xCombox
                .Visible = True
                .Left = Target.Left
                .Top = Target.Top
                .Width = Target.Width + 5
                .Height = Target.Height + 5
                .ListFillRange = xStr
                If .ListFillRange = "" Then
                    xArr = Split(xStr, ",")
                    Me.TempCombo.List = xArr
                End If
                .LinkedCell = Target.Address
            End With
            xCombox.Activate
            Me.TempCombo.DropDown
        End If
    End Sub
    Private Sub TempCombo_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
        Select Case KeyCode
            Case 9
                Application.ActiveCell.Offset(0, 1).Activate
            Case 13
                Application.ActiveCell.Offset(1, 0).Activate
        End Select
    End Sub
  3. մամուլ ալտ + Q ստեղները միաժամանակ փակելու համար Microsoft Visual Basic ծրագրեր պատուհան.

Այսուհետ, երբ կտտացրեք բացվող ցուցակի բջիջը, բացվող ցուցակը ինքնաբերաբար հուշում է: Կարող եք սկսել մուտքագրել նամակը, որպեսզի համապատասխան կետը ավտոմատ կերպով լրացվի ընտրված խցում: Տեսեք,

Նշում: Այս կոդը չի աշխատում միավորված բջիջների համար:

Հեշտությամբ 2 վայրկյանում դարձրեք բացվող ցանկի ավտոմատ լրացում

Excel-ի օգտվողների մեծամասնության համար վերը նշված VBA մեթոդը դժվար է տիրապետել: Բայց հետ Որոնվող բացվող ցուցակ առանձնահատկությունը Excel- ի համար նախատեսված գործիքներ, կարող եք հեշտությամբ միացնել տվյալների վավերացման բացվող ցուցակների ավտոմատ լրացումը նշված տիրույթ ընդամենը 2 վայրկյանում։ Ավելին, այս գործառույթը հասանելի է Excel-ի բոլոր տարբերակների համար:

ԱկնարկՆախքան այս գործիքը կիրառելը, խնդրում ենք տեղադրել Excel- ի համար նախատեսված գործիքներ առաջին հերթին: Անցեք անվճար ներբեռնմանը հիմա.

  1. Ձեր բացվող ցուցակներում ինքնալրացումը միացնելու համար նախ ընտրեք ընդգրկույթը բացվող ցուցակներով: Այնուհետև անցեք դեպի Կուտոլս էջանիշ, ընտրեք Բացվող ցուցակ > Բացվող ցանկը դարձրեք որոնելի, ավտոմատ բացվող.
  2. Է Բացվող ցանկը դարձրեք որոնելի երկխոսության տուփ, սեղմեք OK կոճակը փրկելու համար:
Արդյունք

Կազմաձևումն ավարտվելուց հետո, սեղմելով բացվող ցանկի բջիջը նշված տիրույթում, կհայտնվի ցուցակի տուփ: Նիշեր մուտքագրելիս, քանի դեռ մեկ տարրը ճշգրիտ համընկնում է, ամբողջ բառը անմիջապես ընդգծվում է ցուցակի վանդակում և կարող է լրացվել բացվող ցանկի բջիջում՝ պարզապես սեղմելով Enter ստեղնը:

ՆշումԱյս հատկությունը կիրառելու համար խնդրում ենք ներբեռնեք և տեղադրեք Kutools Excel-ի համար առաջին. Կամ կարող ես սեղմեք այս հատկության մասին ավելին իմանալու համար.

Առնչվող հոդվածներ քանակը:

Ինչպե՞ս ստեղծել բացվող ցուցակ Excel- ում բազմաթիվ վանդակում:
Excel- ի շատ օգտվողներ հակված են բացման ցուցակ ստեղծել բազմաթիվ վանդակում, որպեսզի ամեն անգամ ցուցակից ընտրեն բազմաթիվ իրեր: Իրականում, Դուք չեք կարող ստեղծել տվյալների վավերացումով բազմաթիվ ցուցանակներով ցուցակ: Այս ձեռնարկում մենք ցույց կտանք ձեզ Excel- ում բազմաթիվ ցուցանակներով բացվող ցուցակ ստեղծելու երկու եղանակ: Այս ձեռնարկը տրամադրում է խնդիրը լուծելու մեթոդը:

Excel- ում ստեղծեք մեկ այլ աշխատանքային գրքից բացվող ցուցակ
Տվյալների վավերացման բացվող ցուցակը աշխատանքային գրքում ստեղծելը բավականին հեշտ է: Բայց եթե տվյալների վավերացման համար անհրաժեշտ ցուցակի տվյալները տեղակայվեն մեկ այլ աշխատանքային գրքում, ի՞նչ կանեիք: Այս ձեռնարկում դուք կսովորեք, թե ինչպես մանրամասնորեն ստեղծել Excel- ի մեկ այլ աշխատանքային գրքից թողարկված ցանկի ցուցակ:

Excel- ում ստեղծեք որոնելի բացվող ցուցակ
Բազմաթիվ արժեքներով բացվող ցուցակի համար պատշաճ գտնելը հեշտ գործ չէ: Նախկինում մենք ներմուծել ենք բացվող ցուցակը ավտոմատ կերպով լրացնելու մեթոդ, երբ առաջին տառը մուտքագրեք բացվող վանդակում: Ինքնալրացման գործառույթից բացի, դուք կարող եք նաև բաց թողնել ցանկը որոնելի դարձնել `բացվող ցուցակում պատշաճ արժեքներ գտնելու գործում աշխատանքային արդյունավետությունը բարձրացնելու համար: Բացվող ցուցակը որոնելի դարձնելու համար փորձեք այս ձեռնարկի մեթոդը:

Excel- ի բացվող ցուցակում արժեքներ ընտրելիս ավտոմատ կերպով լրացրեք այլ բջիջներ
Ասենք, որ դուք ստեղծել եք բացվող ցուցակ `հիմնվելով B8: B14 բջիջների տիրույթի արժեքների վրա: Բացվող ցուցակում ցանկացած արժեք ընտրելիս ցանկանում եք, որ համապատասխան արժեքները C8: C14 բջիջների տիրույթում ավտոմատ կերպով լրացվեն ընտրված խցում: Խնդրի լուծման համար, այս ձեռնարկի մեթոդները կօգնեն ձեզ:

Բացվող ցուցակի այլ ձեռնարկներ ...

Գրասենյակի արտադրողականության լավագույն գործիքները

🤖 Kutools AI օգնականՀեղափոխություն կատարել տվյալների վերլուծության հիման վրա՝ Խելացի կատարում   |  Ստեղծեք ծածկագիր  |  Ստեղծեք հատուկ բանաձևեր  |  Վերլուծել տվյալները և ստեղծել գծապատկերներ  |  Invoke Kutools-ի գործառույթները...
Հանրաճանաչ հատկություններ: Գտեք, ընդգծեք կամ նույնականացրեք կրկնօրինակները   |  Deleteնջել դատարկ շարքերը   |  Միավորել սյունակները կամ բջիջները՝ առանց տվյալների կորստի   |   Կլոր առանց բանաձևի ...
Super Փնտրել: Բազմաթիվ չափանիշների VLookup    Բազմակի արժեք VLookup  |   VLookup բազմաթիվ թերթերում   |   Fuzzy Փնտրել ....
Ընդլայնված բացվող ցուցակ: Արագ ստեղծեք բացվող ցուցակը   |  Կախված բացվող ցուցակ   |  Բազմակի ընտրություն Drop Down ցուցակ ....
Սյունակի կառավարիչ: Ավելացրեք որոշակի քանակությամբ սյունակներ  |  Տեղափոխել սյունակները  |  Փոխարկել թաքնված սյունակների տեսանելիության կարգավիճակը  |  Համեմատեք միջակայքերը և սյունակները ...
Առանձնահատկություններ: Ցանցի կենտրոնացում   |  Դիզայնի տեսք   |   Մեծ Formula Bar    Աշխատանքային գրքույկի և թերթիկների կառավարիչ   |  Ռեսուրսների գրադարան (Ավտոմատ տեքստ)   |  Ամսաթիվ ընտրող   |  Միավորել աշխատանքային թերթերը   |  Գաղտնագրել/գաղտնազերծել բջիջները    Ուղարկեք նամակներ ըստ ցանկի   |  Սուպեր զտիչ   |   Հատուկ զտիչ (զտել թավ/շեղ/շեղված...) ...
Լավագույն 15 գործիքների հավաքածու12 Տեքստ Գործիքներ (Ավելացրեք տեքստ, Հեռացնել նիշերը, ...)   |   50+ Աղյուսակ Տեսակներ (Գանտի աղյուսակը, ...)   |   40+ Գործնական Բանաձեւեր (Հաշվարկել տարիքը ՝ ելնելով ծննդյան տարեդարձից, ...)   |   19 միացում Գործիքներ (Տեղադրեք QR կոդ, Տեղադրեք նկար ուղուց, ...)   |   12 Փոխարկում Գործիքներ (Բառեր համարներ, Արտարժույթի փոխակերպումը, ...)   |   7 Միաձուլում և պառակտում Գործիքներ (Ընդլայնված կոմբինատ տողեր, Պառակտված բջիջներ, ...)   |   ... եւ ավելին

Լրացրեք ձեր Excel-ի հմտությունները Kutools-ի հետ Excel-ի համար և փորձեք արդյունավետությունը, ինչպես երբեք: Kutools-ը Excel-ի համար առաջարկում է ավելի քան 300 առաջադեմ առանձնահատկություններ՝ արտադրողականությունը բարձրացնելու և ժամանակ խնայելու համար:  Սեղմեք այստեղ՝ Ձեզ ամենաշատ անհրաժեշտ հատկանիշը ստանալու համար...

Նկարագրություն


Office Tab- ը Tabbed ինտերֆեյսը բերում է Office, և ձեր աշխատանքը շատ ավելի դյուրին դարձրեք

  • Միացնել ներդիրներով խմբագրումը և ընթերցումը Word, Excel, PowerPoint- ով, Հրատարակիչ, Access, Visio և Project:
  • Բացեք և ստեղծեք բազմաթիվ փաստաթղթեր նույն պատուհանի նոր ներդիրներում, այլ ոչ թե նոր պատուհաններում:
  • Բարձրացնում է ձեր արտադրողականությունը 50%-ով և նվազեցնում մկնիկի հարյուրավոր սեղմումները ձեզ համար ամեն օր:
Comments (325)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Hi, many thanks for this material. It helped a lot.
This comment was minimized by the moderator on the site
Hello,

following on from my last comment:

I'm setting up 'standard' rows with the dropdown lists in them. These I'm wanting to copy below into an extensive spreadsheet.
Unfortunately the dropdown's don't copy down when I do that after using the VBA.
Is there a way to do whats described above?

Cheers,
Catherine
This comment was minimized by the moderator on the site
Hi Catherine,
The autocomplete drop-down lists generated by VBA code cannot be copied. You can only copy selected items that are displayed in the drop-down cell. Sorry for the inconvenience.
This comment was minimized by the moderator on the site
Hello,

Have implemented this successfully, so thank you for this page and code.
But now I have an associated problem...:

After doing all of the above points, the code works as described, but I cannot do any undo/redo actions in the entire spreadsheet.
Is there a way to turn this combo box on for when I want to work with the dropdowns and off for when I want to work in other cells? so that the undo/redo actions are possible again?
and note, yes I have turned the design mode off after doing the above steps, but it still doesn't help the problem.

Cheers,
Catherine
This comment was minimized by the moderator on the site
Hi Catherine Foley,
If you want to use the undo operation on cells other than the drop-down cells, the following VBA code can help you. Please give it a try.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'Update by Extendoffice: 2022/09/22
    Dim xCombox As OLEObject
    Dim xStr As String
    Dim xWs As Worksheet
    Dim xArr
    
    On Error Resume Next

    Set xWs = Application.ActiveSheet
    
    Set xCombox = xWs.OLEObjects("TempCombo")
    If Target.Validation.Type <> 3 Then
        If xCombox.Visible Then
            xCombox.Visible = False
        End If
        Exit Sub
    End If
    
    With xCombox
        .ListFillRange = ""
        .LinkedCell = ""
'        .Visible = False
    End With

    Target.Validation.InCellDropdown = False
    Cancel = True
    xStr = Target.Validation.Formula1
    xStr = Right(xStr, Len(xStr) - 1)
    If xStr = "" Then Exit Sub
    With xCombox
        .Visible = True
        .Left = Target.Left
        .Top = Target.Top
        .Width = Target.Width + 5
        .Height = Target.Height + 5
        .ListFillRange = xStr
        If .ListFillRange = "" Then
            xArr = Split(xStr, ",")
            Me.TempCombo.List = xArr
        End If
        .LinkedCell = Target.Address
    End With
    xCombox.Activate
    Me.TempCombo.DropDown

End Sub
Private Sub TempCombo_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
    Select Case KeyCode
        Case 9
            Application.ActiveCell.Offset(0, 1).Activate
        Case 13
            Application.ActiveCell.Offset(1, 0).Activate
    End Select
End Sub
This comment was minimized by the moderator on the site
I hope now it will be upload
This comment was minimized by the moderator on the site
This code works really well for a single drop down. However, if I have 5 dropdowns using the same list of values but they need to operate independently of each other how is that accomplished? Despite my best efforts, if I put more than one combo box on the page, any selection is one is mirrored in the other.
This comment was minimized by the moderator on the site
Hi Mbuchmeier,Only need one combo box on the page. The code works on all drop-down lists in current page. You just need to manually click on the drop-down list cell to activate the combo box.
This comment was minimized by the moderator on the site
Hi crystal,
I am working with the combo box (The VBA code from 2021/11/05). It is working great and very useful but there are 2 issues:1. Issue #1: Usually when you work on any cell in Excel, there is indication on the row number which indicate which row you work about. When the combo box is opened this indication is missing2.  Issue #2: When the combo box is opened in the last column of the dynamic table, then it isn't  working as usual: when I select value from the list, the cell remain empty until I move the cursor to another cell
Attached screenshot.
Thank in advance
This comment was minimized by the moderator on the site
Hi Yoni,Thanks for your feedback. For the issues you mentioned:1. Issue #1: Excel does not highlight the row number when selecting an object in the worksheet. Since we use a combo box to replace the data validation drop-down list to handle the autocomplete operation, we can't show the indication in this case;2. Issue #2: I have tried as you described, but the problem cannot be reproduced. The screenshot you attached does not display, you need to save the screenshot and uplode it via the "Upload files" button below.
This comment was minimized by the moderator on the site
Hi Crystal,Thanks a lot for your response. Attached the screenshot. hope it will work now
This comment was minimized by the moderator on the site
Hi Yoni,Sorry for the inconvenience. The screenshot you uploaded is still not shown on the page. You need to save the screenshot on your disk in advance and then uplode it via the "Upload files" button. See the attached screenshot.
This comment was minimized by the moderator on the site
will, thank you is not enugh :::: alot of thank you then ;;;;; that worked like magic :)
This comment was minimized by the moderator on the site
Yeah, basically completely useless.  Want the cell to auto-complete when typing in a cell using list data validation.Tried this, and now I have to start over from scratch because I can't Undo it.  Thanks.Also loaded with syntax errors.
This comment was minimized by the moderator on the site
It works as it should be except for two things, first, there is no validation after insertion. i.e. if I typed anything at the combo then clicked enter it will accept the typed value while it should not do this since the data validation is being used to prevent such behaviors and make sure that the entered data is from selected range. Second, at the data validation list, sometimes I use big range with empty cells and select ignore empty at validation list but the combo takes all the range and shows it, will be nice to remove the empty cells from the combo range.
Thanks & hope you can implement these things to make it perfect.
This comment was minimized by the moderator on the site
Hi, AhmedThe VBA below helps to solve the problem of blank cells. Since the Combo box accepts the value that are not in the list, we still can't find a way to solve this problem. Sorry for the inconvenience.
<div data-tag="code">Private Sub Worksheet_SelectionChange(ByVal Target As Range)
'Update by Extendoffice: 2021/11/05
Dim xCombox As OLEObject
Dim xStr As String
Dim xWs As Worksheet
Dim xArr, xArr1
Dim xRg As Range
Dim xSrc As Variant
Dim xI, xJ, xIndex, xCount As Integer

Set xWs = Application.ActiveSheet
On Error Resume Next
Set xCombox = xWs.OLEObjects("TempCombo")
With xCombox
.ListFillRange = ""
.LinkedCell = ""
.Visible = False
End With
If Target.Validation.Type = 3 Then
Target.Validation.InCellDropdown = False
Cancel = True
xStr = Target.Validation.Formula1
xStr = Right(xStr, Len(xStr) - 1)
If xStr = "" Then Exit Sub
Set xRg = Range(xStr)
If xRg Is Nothing Then
xArr1 = Split(xStr, ",")
Else
ReDim xArr1(0 To xRg.Count - 1)
For xI = 0 To xRg.Count - 1
xArr1(xI) = xRg.Item(xI + 1).Value
Next
End If
xI = 0
xCount = UBound(xArr1) + 1
For xJ = 0 To UBound(xArr1)
If Replace(xArr1(xJ), " ", "") = "" Then xCount = xCount - 1
Next
ReDim xArr(0 To xCount - 1)
xIndex = 0
For xJ = 0 To UBound(xArr1)
If Replace(xArr1(xJ), " ", "") <> "" Then
xArr(xIndex) = xArr1(xJ)
xIndex = xIndex + 1
End If
Next
xStr = ""
With xCombox
.Visible = True
.Left = Target.Left
.Top = Target.Top
.Width = Target.Width + 5
.Height = Target.Height + 5
.ListFillRange = xStr
If .ListFillRange = "" Then
'xArr = Split(xStr, ",")
Me.TempCombo.List = xArr
End If
.LinkedCell = Target.Address
End With
xCombox.Activate
Me.TempCombo.DropDown
End If
End Sub
Private Sub TempCombo_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer)
Select Case KeyCode
Case 9
Application.ActiveCell.Offset(0, 1).Activate
Case 13
Application.ActiveCell.Offset(1, 0).Activate
End Select
End Sub
This comment was minimized by the moderator on the site
Hi Crystal,
I am working with the combo box (The VBA code from 2021/11/05). It is working great and so useful! thanks a lot.
I found the source of my problem. There was a line of freeze panes which override the combo box.
The only problem now is that the Undo is not working. Any idea?
Thanks in advanced,
Yoni
This comment was minimized by the moderator on the site
Hi,
The code does not support Undo. Sorry for the inconvenience.
This comment was minimized by the moderator on the site
Thanks. Maybe do you know why Worksheet_Change event is not firing once I choose value from the combo box?
This comment was minimized by the moderator on the site
Hi, could you please doublecheck this code, when I use it instead of the dropdown list appearing, the source for the dropdown appears instead. This is the exact function I want, could you please fix it.
This comment was minimized by the moderator on the site
If you use a named range or something similar, like I have with a table column, it will display the named range name instead of the values in that named range. To get what you want, you need to change the xStr to display the worksheet range of that named range, since the .ListFillRange does not take in named ranges directly. This should accomplish it : dim RangeAddress as String: RangeAddress = Range(YourNamedRange).addressand then make the xStr something like this: xStr = "YourWorksheetNameWithTheNamedRangeInIt!" & RangeAddress (important: add the '!' for the sheet reference)
This will make your xStr look something like: NamedRangeSheet!$A$1:$A$5
xStr = Right(xStr, Len(xStr) - 1)

If .ListFillRange = "" Then
xArr = Split(xStr, ",")
Me.TempCombo.List = xArr
End If

with these adjustments your combobox should display the list values instead of the source
This comment was minimized by the moderator on the site
Hi Syu,Sorry I don't quite understand your description. Can you try to be more specific of it?After applying the VBA code mentioned in the above method, when the cell with the data validation drop-down list is checked, the drop-down list turn into a combo box, and then all the items in the list are listed. 
This comment was minimized by the moderator on the site
do you have an example file please?
This comment was minimized by the moderator on the site
Hello. The code is very cool. Please make sure that the formula "INDIRECT" is carried out and displayed. It is very necessary
This comment was minimized by the moderator on the site
The code is not working for a validation list which is created by vba code and the source is a named range
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations